Categories
Contact
E-mail :
Wechat：
Tel：
Address：
No.58,Wangtang, road, Tangpu Town, Shangyu District,Shaoxing City,Zhejiang Province.
Refrigerator Compressor Process Pipe
As the name implies, process tube is a process to be used in the production of refrigerator production line there are several procedures "vacuuming liquid sealing" are for the general maintenance of the process tube refrigerator with it and three-way valve to extract vacuum and liquid.
1.When two copper pipes are together, heat dissipation is accelerated and the heat is quickly transferred away;
2.It has not been red-hot for a long time, but you have turned down the oxygen. Turn up the oxygen a little bit, but be careful not to burn through the tube.
From the point of view of the structure design of refrigerator compressor, the interface of process tube and low-pressure tube is interchangeable, which will not affect the normal operation of the compressor.
Copper Fittings for Refrigerator
The process tube on the compressor is the port for filling and discharging the refrigerant (refrigerant), vacuuming the compressor and the connected condenser and evaporator as well as the system pressure test. It is also the final closed port after the above work is completed.
Generally, the process tube of the compressor will be sealed by gas welding after filling with refrigerant and lubricating oil. The tube you find that is not connected to the compressor is the process tube.
Copper Fittings for Refrigeration
The thermal conductivity of copper is better than aluminum, welding performance, mechanical strength is far better than aluminum, although the price is also more expensive than aluminum, but the first choice of copper pipe.
Process tube is very short, you have to do is to weld down the original process tube, new process tube, it is recommended not to install one-way valve, according to my experience one-way valve is a cause of fluorine leakage.
Refrigerator Compressor Process Tube
Stress will lead to coupling assembly concentricity deviation, the deviation is too large when the unit is easy to cause the breadth of overweight, bearing overheating, serious when can cause compressor damage.
LET'S MAKE YOUR
PROJECT A REALITY
Add:No.58,Wangtang, road, Tangpu Town, Shangyu District,Shaoxing City,Zhejiang Province.
